FREE SHIPPING ON ALL BUSHNELL PRODUCTS
SEARCH
News
-
What is the in mold labeling?Blow Mold or Injection Mold?
In-Mold Labeling In-mold labeling (IML) describes a fully automated process in which the pre-printed IML film label is placed in the mold before the container is created. The label seamlessly fuses to the hot plastic material as its being molded, combining the production...Read more -
Silicone cake mold maintenance method
1. Please clean the silicone mold in time after each use. 2. Do not rinse with cold water immediately after leaving the oven to prolong the service life. 3. Wash with hot water and diluted edible detergent, or wash in the dishwasher. 4. Do not use corrosive detergent or ...Read more -
Precautions for the use of silicone cake molds
1. For the second use, please clean the silicone cake mold and apply a layer of butter on the mold. This operation can extend the life of the mold. There is no need to repeat this operation afterwards. 2. Do not directly touch open flames or heat sources, and do not appr...Read more -
How to use silicone cake mold ?
1. Stir the cake making ingredients according to the cake making recipe, and put them in the silicone cake mold. 2. Put the raw materials according to the shape of the silicone cake mold and shape the cake. 3. Sprinkle decorations such as chocolate and raisins on top of ...Read more -
Silicone products supplier
DECAI silicone products manufacturers have many years of experience in the production of silicone products, and have a R&D and production technical team to conduct R&D and production of silicone products to ensure product quality and meet export certification sta...Read more -
How to use silicone rubber roller?
1. Turn on the heating to check whether the silicone roller rotates normally, turn it off and pay attention to whether the residual temperature delay is normal. The residual temperature delay is generally set at 40-50 minutes. 2. When replacing the rubber roller to tighten the silicone, wai...Read more -
The advantages of the heat transfer film
The advantages of the heat transfer film are: 1: Green environmental protection seal, no pollution, in line with international standards. 2: Eight-color patterns are printed at one time, without color registration, which avoids the sho...Read more -
What are the characteristics of polyurethane rubber roller?
(1) Polyurethane rubber rollers have good chemical properties and are suitable for various types of inks and printing methods. It has special resistance to solvent components in various inks, fountain solutions and cleaning agents. (2) The colloid used for polyurethane rubber rollers has s...Read more -
Precautions for buying silicone nipple
1. The texture should be soft enough The baby’s gums are very weak, and the quality of the material directly affects the baby’s sucking and feeding process, so as to minimize the damage to the child’s teeth. 2. Milk hole size Is the through hole large enough and whether ...Read more -
Precautions for custom silicone sleeve
Silicone protective covers are currently the most commonly used electronic protective cases. They are more common in electronic products such as mobile phones and tablets. If you are using them, it must be because they are attractive to you, such as resistance to falling...Read more -
How to clean the silicone wristband？
How to clean the silicone wristband？ Wearing a silicone wristband for a long time may show some dirt or grease and other dirty things, which greatly affects the wearing experience and fashion. So how to clean the silicone wristband? 1. Clear water The silicone bracelet...Read more -
Silicone products customization
What we can provide for you? 1. Sample development and design Analyze how the samples are processed and customized through the 3D drawing file design, and how to carry out the mold development, so as to provide customers with reasonable and appropriate designs in terms o...Read more