The heat transfer film production process typically involves several steps, including:
1. Design Creation: A designer creates a design for the heat transfer film using specialized software.
2. Film Material Selection: The manufacturer selects the type of material to be used for the film production based on the intended use of the film.
3. Film Printing: The selected design is printed onto the film material using a specialized ink or dye sublimation process.
4. Film Cutting: The printed film is then cut into the desired shape using a cutting tool or laser cutter.
5. Transfer Application: The heat transfer film is applied to the desired surface by using heat, pressure, and a special adhesive layer on the back of the film. The film is typically applied using a heat press or other specialized transfer equipment.
6. Finishing: Once the heat transfer film has been applied, any excess material is trimmed away and the finished product is inspected and packaged for distribution.
tel: +0086-18161813106
Email: rubber_printing02@126.com
Address:Zhejiang Province, China
Whatsapp: +0086-18161813106
Wechat: wxid_ll1lgnrsxczg22
Post time: Jun-13-2023