FREE SHIPPING ON ALL BUSHNELL PRODUCTS

News

  • Reasons for gaps in the product after IML label injection molding

    Reasons for gaps in the product after IML label injection molding

    IML (In-Mold Labeling) injection molding is used to create high-quality, aesthetically pleasing plastic products. However, IML labels can develop gaps at the seams after injection molding. This is mainly caused by improper label placement in the mold cavity, improper mol...
    Přečtěte si více
  • Reasons for IML label wrinkles

    Reasons for IML label wrinkles

    IML labels often have wrinkles after injection molding, which results in poor overall label effect, not only wasting labels, but also causing waste of products, leading to increased costs. Today, we will mainly analyze the causes and solutions of IML label wrinkles from ...
    Přečtěte si více
  • Heat Transfer Film For Plastic

    Heat Transfer Film For Plastic

    Heat Transfer Film For Plastic: All the printing oil is safe and poisons free with international standard; 10 colors patterns can be easily finishes in one process; Can add high values to the products for vivid patterns and lively colors; Strong adhesion and wear resistance after transfer...
    Přečtěte si více
  • Advantages and disadvantages of IML

    Advantages and disadvantages of IML

    advantage 1. New and beautiful appearance. Because the label in the mold and the plastic parts are naturally integrated, they are deformed with the deformation of the bottle, so there will be no foaming, wrinkling and other phenomena. At the same time, the mold labeling printing is exquisite, can...
    Přečtěte si více
  • How to maintain thermal transfer processing equipment?

    How to maintain thermal transfer processing equipment?

                                                                                                                                              Thermal transfer processing production environment: there is no high-power or radioactive equipment around the inkjet printer, to prevent the inkjet equipment ...
    Přečtěte si více
  • Heat transfer flower film precautions

    Heat transfer flower film precautions

    Matters needing attention When the material is ready, it can be printed on the press. Generally, the release layer, the printing layer and the adhesive layer are coated and printed on the same gravure press. unreeling The substrate film is installed in the center of the reel, through the middle o...
    Přečtěte si více
  • Foaming agent for silicone foam board

    Foaming agent for silicone foam board

    chemical foaming agent Products name appearance Decomposition temperature Applicable technology Product application Q-SIFPJ Fine white powder 120 ℃ Molding, extrusion              Compatible with various curing agents The cell structure is fine, and the gas output is large. It is sui...
    Přečtěte si více
  • Why are there wrinkles on IML labels after injection molding?

    Why are there wrinkles on IML labels after injection molding?

    There may be many reasons why IML labels have wrinkles after injection molding. The reasons behind them can be analyzed based on the pictures after injection molding. Today we will analyze the re...
    Přečtěte si více
  • Reasons and solutions for insufficient static electricity in IML in mold label

    Reasons and solutions for insufficient static electricity in IML in mold label

    1) There is no static electricity added to the label when it leaves the factory. You can ask the supplier to add more static electricity when it leaves the factory, or buy an electrostatic generator to add static electricity. ...
    Přečtěte si více
  • Customer repeat order in mold label

    Customer repeat order in mold label

    Customized heat transfer film repeat order Thanks for customer trust for repeat 40,000 pieces of in mold label order Design:free design Size:cust...
    Přečtěte si více
  • The heat transfer color will fade after being transferred to the paint bucket

    The heat transfer color will fade after being transferred to the paint bucket

      The reason When it comes to using heat transfer materials to customize and personalize items such as t-shirts, caps, or bags, it's important to understand that the colors can fade over time and with use – especially when heat...
    Přečtěte si více
  • Why do PE buckets need to be flame treated before heat transfer?

    Why do PE buckets need to be flame treated before heat transfer?

    In order to avoid poor adhesion, low surface energy and reduced durability caused by direct printing of PE materials, PE buckets need to be flame-treated before heat transfer. Flame treatment is a process that exposes the PE bucket sur...
    Přečtěte si více
123456 Next > >> Page 1 / 41